Duct Damper Hot Dipped

Product NameDuct Damper Hot Dipped
MaterialPlastic,ABS,PVC or other material
ColorWhite or custom color
StandardChina standard
SizeCustomized
MOQ10
PackagingStandard packaging
Delivery30day
  • UFGS 23 31 13.00 40 Metal Ducts

    (Hot-Dip Galvanized) Coatings on Iron and Steel Products ASTM A653/A653M (2020) Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process ASTM A924/A924M (2020) Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    Ask For Quote Details
  • IRIS Dampers

    An IRIS damper will deliver an airflow measurement with an accuracy of ± 5% when installed in a section of straight duct. Duct features such as elbows, T-junctions or diffusers tend to create disturbances in the airflow, and will reduce the air balancing accuracy of an IRIS damper to ± 10%.

    Ask For Quote Details
  • DAMPERS

    NYBORG CIRCULAR SHUT-OFF DAMPER DAMPER HOUSING, DAMPER PLATE, OPERATING FIELD, OPERATING HANDLE, DAMPER SHAFT, Matl. : St.37, Hot Dipped Galvanized Matl.: AISI 316L c/w open/closed Indicator c/w Clamping Screw and Wing Nut Matl. : AISI 316L To be equipped with actuator (pneumatical or electrical) up to size Ø 630 DIA

    Ask For Quote Details
  • Duct flange Manufacturers & Suppliers, China duct flange

    Duct Corner , Damper Regulator , Duct Flange , Insulation Pin , Self Adhesive InsulationHot Dipped Galvanized Steel , HVAC Ductwork , Slitting Machine , Galvanized Steel

    Ask For Quote Details
  • Batch hot

    The two most common methods of applying zinc metal to steel handrail tubing are batch hot-dip galvanizing and inline, continuous galvanizing. The batch hot-dip method provides a coating thickness approximately 3 times that of the inline method, and a coating that lasts approximately 3 times as long. However, for indoor applications that do not require more than 500 PSI of bond strength, inline

    Ask For Quote Details
  • Spiral Manufactuing

    PVS is manufactured by a three step process: 1) hot-dipped, galvanized G- 60 steel is cleaned and fire treated; 2) a special epoxy primer is baked onto both sides of the sheet; 3) Finally, a 4 mil. polyvinyl chloride coating is heat fused onto one side (4 x 1) for underground HVAC or onto both sides (4 x 4) for chemical fume exhaust applications.

    Ask For Quote Details
  • Sheet Metal Duct Damper Section Badger Metals Inc.

    • Sheet Metal Duct Damper Section• Type Round• Duct Size 8 Inch Diameter• Blade Material Hot Dip Galvanized Steel• Application Residential and Light Commercial

    Ask For Quote Details
  • Benair Air Conditioning CO.LLC

    Made of Hot-dipped Galvanised Steel (Lockforming quality) with coating designation of G& adjust the damper. Other Accessories Duct Canvass Connector Duct Rain Cowl

    Ask For Quote Details
  • Dampers

    IRIS DAMPER IRIS-S DAMPER • Hot dipped galvanized steel construction • AISI 316 stainless steel construction • Prolonged excellence in extreme conditionsChart, desired airflow in a duct can be attained by simply turning the damper adjustment nut until the required pressure drop is reached (Fig. 1).

    Ask For Quote Details
  • Dampers

    Blades: Hot-dip galvanized steel. Sizes: 100x100 ~ 400x800 mm. Operation system: by static air pressure. Non-return dampers ALND non-return dampers are installed in ventilation ductwork of ships and off-shore objects to prevent the backflow of air through the ventilation ducts. ALND non-return dampers Frame: Hot-dip galvanized steel

    Ask For Quote Details
  • IRIS Dampers

    The IRIS damper represents a resistance to airflow in a duct, as do the duct and fittings. Selecting an IRIS damper is simple. In the case of an existing duct, choose an IRIS damper to match the duct size. Alternatively, use the IRIS damper selection curves on pages 4 & 5 of the PDF Brochure.

    Ask For Quote Details
  • BDH blast protection damper for demanding applications

    BDH blast protection dampers are available for rectangular ducts and wall openings. Width B is 300-1200 mm, 25 mm division. Height H is 200-1200 mm, 50 mm division. Larger damper available as a modular construction. As a standard, flange width and bolt hole drilling is according to ISO 15138 standard. Frame depth is 400 mm, frame thickness is 5 mm.

    Ask For Quote Details
  • DAMPERS

    NYBORG CIRCULAR SHUT-OFF DAMPER DAMPER HOUSING, DAMPER PLATE, OPERATING FIELD, OPERATING HANDLE, DAMPER SHAFT, Matl. : St.37, Hot Dipped Galvanized Matl.: AISI 316L c/w open/closed Indicator c/w Clamping Screw and Wing Nut Matl. : AISI 316L To be equipped with actuator (pneumatical or electrical) up to size Ø 630 DIA

    Ask For Quote Details
  • Rectangular Duct Fittings | Auer Steel

    Heating & Cooling Products 01112107 Assembled Duct Damper, 12 x 10 in Damper, Steel, Hot Dipped Galvanized Brand Name: HCP™ Manufacturer Name: Heating & Cooling Products

    Ask For Quote Details
  • 12" Air Duct 45 Degree Takeoff with Gasket, Damper

    ASTM A653 CS Type B Hot Dipped Galvanized Steel;ASTM A653 CS Type B Hot Dip Galvanized Steel. Rect. Opening. 18" x 8-1/2". Series/Model. Model 3300-DS;3300-DS. Size. 12 Inch. Size A. 18 Inch Length x 8-1/2 Inch Width.

    Ask For Quote Details
  • hot dipped galvanized sheet metal duct, hot dipped

    974 hot dipped galvanized sheet metal duct products are offered for sale by suppliers on Alibaba.com, of which metal building materials accounts for 4%. A wide variety of hot dipped galvanized sheet metal duct options are available to you, such as graphic design, others, and total solution for projects.

    Ask For Quote Details
  • Spiral Manufactuing

    PVS is manufactured by a three step process: 1) hot-dipped, galvanized G- 60 steel is cleaned and fire treated; 2) a special epoxy primer is baked onto both sides of the sheet; 3) Finally, a 4 mil. polyvinyl chloride coating is heat fused onto one side (4 x 1) for underground HVAC or onto both sides (4 x 4) for chemical fume exhaust applications.

    Ask For Quote Details
  • Ductwork Zone Damper Actuator Replacement

    An automatic duct damper is usually controlled by a room thermostat, which opens or closes a metal baffle inside of a warm air (or cool air) heating (or cooling) duct in order to provide multiple heating zone control in a building. On 2020-03-24 by James - no air coming out of zone 1 in my forced hot air heating system. Have a 2 zone system.

    Ask For Quote Details
  • IRIS DAMPERS PRODUCT SPECIFICATION GUIDE

    2.0 DAMPER CONSTRUCTION A. Iris dampers shall be manufactured of hot dipped galvanized 22 gage steel. B. Duct connections shall be gasketed and beaded to provide for a sealed duct connection. C. Airflow measurement taps shall be provided with airflow adjustment charts located on the damper for convenient airflow measurement and control.

    Ask For Quote Details
  • Duct Access Doors

    They provide a durable, practical, and inexpensive means of gaining access to damper components inside the ductwork. Gasket is permanently bonded to inside of door to prevent leakage; High impact plastic knobs designed to avoid stripping and allow tool-free operation; Three layers of precision, stamped, hot-dipped galvanized steel; EDPM gasket

    Ask For Quote Details
  • Guide to Zone Dampers for Heating & Cooling Air Duct Controls

    The duct damper is located in an air duct and blocks the flow of warm or cool air into building rooms. It has nothing to do with venting flue gases up a chimney. Our photo shows a motorized zone damper or air duct zone control produced by TrolATemp® a producer of automatic heating system controls. This unit is an automatic opposed-blade duct

    Ask For Quote Details


Our Location

Contact Us

Boda Aluminum Products Co.,LTD

Address: Jingjiang, Taizhou City
Jiangsu Province, China
Zip code - 214500
Telephone: +86 18262317598
E-mail: [email protected]